RoundTriptm
Empty Container and IBC Disposal
Myers/CMS is only permitted to accept empty containers. Failure to abide by these rules may result in substantial
charges.
Step 1 - Review our Acceptance Procedures
All Drums or IBCs
with
Hazardous and Non-Hazardous residues
must be:
-
Pourable Materials -
Drip-dry empty - (if
we can pour it, you can pour it...)
If the hazardous material which the container
or inner liner held is pourable, no hazardous
material can be poured or drained from the container or inner liner when
the container or inner liner is held in any orientation (e.g., tilted,
inverted, etc.); and
- Not Pourable
Materials - No hazardous material remains in or on the container
If the hazardous material which the container
or inner liner held is not pourable, no
hazardous material remains in or on the container or inner liner that can
feasibly be removed by physical methods (excluding rinsing) which comply
with applicable air pollution control laws and which are commonly employed
to remove materials from that container or inner liner. Following material
removal, the top, bottom and sidewalls of such a container shall not
contain remaining adhered or crusted material resulting from buildup of
successive layers of material or a mass of solidified material. A thin
uniform layer or dried material or powder is considered acceptable.
- All Labels must be in place
(as when you received the container)
- Closures secure (all
plugs, rings, valves in place and secure as when full)
Additional
information: Container Acceptance Policy
and
IBC Acceptance Procedures
Step 2 - Submit Material Safety
Data Sheets for approval
This
step is for New Emptiers or
Existing Emptiers with
new material types only. Attached are MSDS’s for empty packaging’s
that are being proposed for acceptance at Container Management Services,
LLC.
Once you have determined
that you can meet the requirements above please
Open, Save and
Complete (or Print and fill out manually) the
Fax Cover / E-Mail Attachment page (link
below) and submit with the MSDS copy
by Mail, Fax or Email.
Drum
Acceptance Fax _ Email Cover Sheet
CMS Facilities in California
and Oregon (IBC's, Steel and Poly Drums):
Myers
Container/CMS
Attention: Sean Reynolds
8435 NE Killingsworth St
Portland,
OR 97220
or Email
to:
or fax: 503.501.4929
Step 3
-
Provide Account Information,
Obtain Pricing and Request a Container Pick-Up (after Steps 1 & 2)
By Internet:
Empty Container Pick Up Request
By email:
orders@myerscontainer.com
By Fax:
706.463.3167
By Phone: 503.501.4929
Step 4 - Complete Empty
Certification at time of collection
Empty Container Receipt - Federal
Empty Container Receipt - California Only
 Download Acrobat
Reader for free to read
|
