Myers Container UN Hazmat Test

Customer Service
7:30 AM - 4:30 PM PT
800.406.9377
E-mail | Home

Specific Hazardous Material Training Program
per CFR 49 §172.700

All Hazardous Material Employees are required to receive specific hazardous material training every three (3) years or within ninety (90) days of starting a new hazmat position.

You will find all the hazardous material training information at the following location http://www.myerscontainer.com/unpackaging.htm. Once you have reviewed this information, please complete the following test. Use the indicated hyperlinks to find the correct answers. Once you submit the test, a confirmation will show your score. If you get any of the questions incorrect you must start over on test until all answers are correct. Once you successfully complete the test, the name and date of your certification will be posted at on your Partnership Page(tm).

Date
First Name
Last Name
Company
Phone Number:
E-Mail Address:
Address:
City:
State:
Zip:

Question 1 Myers Container requires a minimum of 60 ft. lbs. stabilizing torque when assembly a openhead container. http://www.myerscontainer.com/mccun.htm	True False
Question 2 A hazmat employee is anyone who during the course of their job can effect the safe transportation of hazardous materials. http://www.myerscontainer.com/uninfo.htm	True False
Question 3 "1A1" in the UN Marking UN 1A1/Y1.5/150 represents "drum, steel, tighthead or tighthead steel drum." http://www.myerscontainer.com/unmarking.htm	True False
Question 4 "1.5" in the UN Marking UN 1A1/Y1.5/150 represents "the specific gravity placed of the product being packed into the container." http://www.myerscontainer.com/unmarking.htm	True False
Question 5 "150" in the UN Marking UN 1A1/Y1.5/150 represents the maximum rating hydrostatic pressure in kPa (kilopascals) rating of the the product being packed into the container. http://www.myerscontainer.com/unmarking.htm	True False
Question 6 The four tests that must be performed annually to a package design designated to transport liquids for non-bulk packaging are: drop, stack, hydrostatic, leakproofness. http://www.myerscontainer.com/untesting.htm	True False
Question 7 Every drum designated for hazardous use must be leakproofness tested. http://www.myerscontainer.com/untesting.htm	True False
Question 8 The maximum net mass that can be placed into a non-bulk container is 400 kilograms or 880 pounds. http://www.myerscontainer.com/uninfo.htm	True False
Question 9 It is the responsibility of the packager/shipper, not the container manufacturer, to determine the proper package specification for each lading. The shipper determines that the drum is authorized, assembled and marked for packaging. The shipper may request a certificate of compliance from the manufacturer to demonstrate that each container conforms with the performance testing provisions in §178.600. . http://www.myerscontainer.com/unresponse.htm	True False
Question 10 It is the shipper's responsibility to assemble the container for shipment in accordance with the manufacturer's instructions. http://www.myerscontainer.com/unassemble.htm	True False

Customer Service
800.406.9377
Contact Us | Home